Custom Multi-way battery chargers take many forms, usually bench mounted and using one of our standard cases.
We have 15 different case formats for multi-way chargers, all of which can be supplied with customer's colours and
logos. 6 different charger types are available for small multi-way chargers, constant voltage and constant current.

Charger circuitry available:
CC18 - Single rate constant current up to 400mA - no timer
CC186 - Single-rate constant current up to 1.5A - no timer
CV31 - Constant voltage up to 1A
CC19 - Cycling constant current up to 1A, with pre-discharge cycle
CC91 - Dual-rate constant current up to 1A, electronically timed bulk charge.
CC44 - Dual-rate constant current up to 1A, mechanically timed bulk charge.

A 10-Way CC91 unit is shown in the picture above. This would be rated for any number from
1 to 10 batteries, each channel being independent of the others.
No output leads were fitted in the unit shown to make the photo cleaner.

A 5-Way CC18 Military radio charger unit is shown in the picture above.
This is rated for any number from 1 to 5 batteries, each channel being independent.
The unit has a DC-DC switching converter fitted to enable operating from 10V to 30V input..

A 10-Way CC18 commercial charger unit is shown in the picture above.
This is rated for any number from 1 to 10 batteries, each channel being independent.
The unit has a DC input option fitted to enable operating from 28V input..
Contact us: Phone: +44 (0) 1933 356666 Fax: +44 (0) 1933 355557 Email: prepair@easynet.co.uk

• General catalogue Page • Home •

Charger circuitry available:
CC18 - Single rate constant current up to 400mA - no timer
CC186 - Single-rate constant current up to 1.5A - no timer
CV31 - Constant voltage up to 1A
CC19 - Cycling constant current up to 1A, with pre-discharge cycle
CC91 - Dual-rate constant current up to 1A, electronically timed bulk charge.
CC44 - Dual-rate constant current up to 1A, mechanically timed bulk charge.