The top cover carries the operator instructions and the output indicator light (with replaceable bulb).
The instruments are located behind a sealed Makrolon window to keep the weather out.
Two M12 eyenuts are provided for lifting the charger. Lifting forces are taken through to the
main chassis by two 12mm stainless steel rods. Removal of the top cover takes less than a minute.

Indicators are provided for AC ON, CHARGE, FAULT and INHIBIT, with 2 spare positions.
The switches on the front are IP65 sealed types, with another label to show their operation.

Contact us: Phone: +44 (0) 1933 356666 Fax: +44 (0) 1933 355557 Email: prepair@easynet.co.uk

• General catalogue Page • Back to Mobile Page • Home •

Indicators are provided for AC ON, CHARGE, FAULT and INHIBIT, with 2 spare positions. The switches on the front are IP65 sealed types, with another label to show their operation.

Indicators are provided for AC ON, CHARGE, FAULT and INHIBIT, with 2 spare positions.
The switches on the front are IP65 sealed types, with another label to show their operation.